Products Name: ELEVEN LAB PCB Prototype

Products Details:

MITS, ELEVEN LAB PCB Prototyping Low-cost, wide range table size, XYZ triple-axes control, high resolution, standard camera monitoring system Suitable for processing normal substrate boards up to approximately A4 size (297mm x 210mm). Standard camera monitoring system Magnify the surface of the board and display on a monitor. You can easily adjust the right position while viewing display. (Maximum useful magnification depends on the size of the screen) AUTO LAB SPECIFICATION

Minimum pattern width (mm) 0.1 (4 mil)
Minimum milling width (mm) 0.1 (4 mil)
Working area (X/Y/Z) (mm) 229 x 320 x 57 (9.0" x 12.6" x 2.24")
Table size (mm) 296 x 396 (11.6" x 15.6")
Control axis X, Y, Z
Control motor Stepper Motor
Resolution (µm) *3 0.625 (0.0246 mil)
Maximum Travel Speed (mm/sec.) *1 55 (2.17")
Spindle speed (min-1) Spindle motor 5,000 - 41,000
DC Spindle
Drilling (mm) 0.2 - 3.175 (8 - 125 mil)
Maximum drilling cycle (cycles/min.) *2 50
Maximum thickness of processed material (mm) *4 10 (0.4")
Tool change Lever action clamp
Milling method Absolute No
Incremental Yes
Compressed air (Mpa) ----
Power consumption 100 - 240 V, 50-60 Hz, 150VA
Machine dimensions  W x D x H (mm) 435 x 575 x 430 (17.2" x 23" x 17") 
With cabinet: 462 x 575 x 467 (18.2" x 23" x 19")
Machine weight (kg) Approx. 28 (62 lbs)
With cabinet: Approx. 38 (84 lbs)
Interface One USB or one RS-232C port
Standard equipement Fiducial positioning camera (USB)*5
10 Pieces Auto Tool Change
Software: EASY CAD, Conversion & CAM
Options and accessories Cabinet
Software: Correct DXF
Vacuum cleaner 
Video manual
Starter kit
Connecting Cable (RS232C / USB)
Magnifying glass 10x
Extention hose for Vacuum cleaner

Tools : End Mills, Drill Bit, Router Bit

*1 Optimum speed for cutting depends on tool, material of board and so on. *2 This is a repeat count of drill's up and down on the maximum stroke. Optimum strokes depends on the diameter of tool. *3 The smallest traveling figures for ordering each 3 axis movement. They do not represent the accuracy of axis positioning. *4 Value of the thickness of the material on the work table. This value does not show the maximum drilling stroke. *5 Maximum useful magnification depends on the size of the screen

For more details, please check


ODEOM Elektronik Ltd.Şti. Copyright 2013 © All right reserved.

design ayrıntı